Gas Fireplace Repair Service in Utah

When your fireplace stops working, you need a technician you can trust. At Croft Fireplace, we provide gas fireplace repair service in Utah for homeowners throughout the Wasatch Front. Our certified technicians diagnose and fix everything from stubborn pilot lights to full system failures, backed by honest pricing. For gas fireplace repair Utah homeowners depend on, call or schedule online today.
Request Repairs
Home » Fireplace Repair Services in Utah

Signs Your Fireplace Is in Need of Repairs

Noticing issues with your fireplace? Here are some of the most common signs a fireplace needs repairs:

  • Foggy glass
  • Inability to ignite
  • Hard start with a loud bang noise
  • Cracked or damaged logs or firebricks
  • Smaller or abnormal flames
  • Inconsistent Pilot light
  • Irregular shutoff during use
  • Noisy blower
  • Cracked or damaged glass
  • Natural gas odor
  • Excessive soot buildup

Addressing these signs promptly helps prevent further damage and ensures your fireplace operates safely. Fill out the form below, and one of our representatives will contact you shortly to assist with your fireplace needs.

Signs Your Fireplace Is in Need of Repairs

Watch for these warning signs: the fireplace takes multiple attempts to start, the pilot light will not stay lit, there is a gas smell near the unit, the flame looks yellow or uneven, the blower runs loudly or not at all, or there is soot around the firebox opening. Any of these warrants a gas fireplace service and repair visit before the issue gets worse.
gas-fireplace

Types of Fireplace Repair Services We Offer

Whatever fireplace type you have, our technicians have the training and parts to get it running again.

Gas Fireplace Repair

We handle ignition failures, thermocouple replacements, gas valve issues, and control board malfunctions on both natural gas and propane units across all major brands.

Electric Fireplace Repair

We diagnose and repair heating elements, blower motors, flame effect components, and wiring issues in electric fireplaces.

Wood-Burning Fireplace Repair

Croft Fireplace specializes in gas and electric systems and does not service wood-burning fireplaces. If you need wood-burning fireplace repairs, we are happy to refer you to a trusted chimney sweep or brick mason who can help.

Fireplace Insert Repair

We service both gas and electric insert models and can source replacement parts for most major brands.

Common Fireplace Problems We Fix

Here are the most common problems our technicians are called in to resolve.

Fireplace Not Igniting

When a fireplace will not light, the cause is often a faulty igniter, a worn thermocouple, or a gas supply valve problem. We isolate the issue and make the right repair on the first visit.

Weak or Uneven Flame

A weak or uneven flame signals restricted gas flow, a dirty burner, or a regulator pressure issue. Cleaning and testing the burner assembly usually restores a steady flame.

Pilot Light Issues

A pilot that will not stay lit is typically caused by a failing thermocouple. Replacement is straightforward and usually resolves the issue quickly.

Gas Leaks & Odor Problems

If you smell gas near your fireplace, turn off the supply and call us right away. We locate leaks safely and verify every repair before the unit returns to service.

Blower & Fan Malfunctions

When the blower is noisy or not circulating heat properly, the cause is usually a worn motor, faulty control board, or sensor issue. We replace affected components as needed.

Full Service Cleaning

A clean fireplace is a safe fireplace. Our full-service cleaning removes buildup and keeps your system running at peak efficiency.

FULL-SERVICE CLEANING

Our cleaning covers the burner assembly, logs, glass, pilot assembly, and firebox interior, removing carbon deposits and debris that reduce efficiency and accelerate wear.

OPERATION AND SAFETY CHECK

Following the cleaning, we run a complete operation and safety check covering all controls, igniters, thermostats, and safety shutoffs.

Fireplace Tune-up Service

Our tune-up is designed for units that are running but could be performing better.

LABOR INCLUDES THE TIME TO REPAIR OR REPLACE ANY OF THE FOLLOWING AS NEEDED:

Labor during a tune-up covers the pilot assembly, air shutter, thermocouple or thermopile, blower components, and wiring connections. We also verify that remote controls and wall switches communicate correctly with the unit.

Fireplace Inspection & Safety Checks

A proper inspection confirms your fireplace is safe to operate.

Gas Line & Leak Inspection

We inspect the full gas supply line from the shut-off valve to the burner using a calibrated leak detection tool to confirm all connections are secure.

Venting & Airflow Check

We check the flue, termination cap, and vent connections for blockages or damage, including both intake and exhaust paths on direct-vent units.

Carbon Monoxide Safety Testing

Carbon monoxide (CO) is a colorless, odorless gas that can build up when combustion appliances vent incorrectly. We test the area for CO presence and advise on next steps if elevated levels are found.

Glass, Seals & Gasket Inspection

We inspect the glass panel for cracks or seal failure and check gaskets for proper compression, since damaged seals allow combustion gases into the living space.

Fireplace Maintenance Services

Annual Cleaning & Tune-Ups

Annual cleaning and tune-up covers all essential maintenance tasks, ensuring your fireplace is ready when temperatures drop.

Preventative Maintenance Plans

Our preventative maintenance plans include scheduled visits, priority scheduling, and discounted repair rates.

Seasonal Inspection Services

A fireplace that sat idle through summer can develop problems that are not apparent until you need it. Seasonal inspection services catch these issues early.

Benefits of Regular Maintenance

Consistent gas fireplace service and repair lowers the likelihood of emergency failures and keeps energy consumption in check.

Cost of Fireplace Repair in Utah

Average Repair Costs

Most routine repairs fall between $100 and $350. A comprehensive gas fireplace repair and service visit including diagnostics and a component replacement typically runs $200 to $500.

Factors Affecting Pricing

The type and age of the unit, the specific component needing attention, and whether parts must be ordered all affect the final cost. We always provide a clear estimate before work begins.

Cost of Parts & Labor

Labor is charged by the job for most standard repairs, and we carry commonly needed components in our service vehicles to minimize return trips.

When Repair vs Replacement Makes Sense

If repair costs less than 50 percent of a comparable replacement unit, repair is usually the better financial decision.

Fireplace Repair vs Replacement Guide

When to Repair Your Fireplace

Repair is the right call when the unit is less than 15 years old, the failing component is isolated, and the rest of the system is in good condition.

When to Replace Your Fireplace

Replacement makes more sense when the fireplace is over 20 years old, requires frequent repairs, or is significantly less efficient than modern options.

Cost Comparison

Gas fireplace repair in Utah typically costs a few hundred dollars, while a new installation ranges from $2,000 to $6,000 or more.

Long-Term Efficiency Considerations

Modern gas fireplaces operate at significantly higher efficiency than older units. A well-maintained fireplace can serve reliably for 25 to 30 years.

Emergency Fireplace Repair Services

Gas Leak Emergencies

A gas leak is a safety emergency. Leave the area, avoid switches, call your gas provider to shut off supply, then call us for a full inspection.

Fireplace Not Turning Off

A fireplace that will not shut off likely has a stuck gas valve or control board malfunction. Shut off the gas at the supply valve and call us immediately.

Sudden System Failures

Sudden failures can result from a blown thermal safety fuse, a power interruption, or a pressure drop. Our technicians carry diagnostic tools and common parts to resolve most issues on the first visit.

When to Call a Professional Immediately

Call a professional right away if you smell gas, see yellow or orange flames in a gas unit, notice excessive soot around the firebox, or if a CO detector alarm sounds near the fireplace.

Service Areas for Fireplace Repair in Utah

When searching for gas fireplace repair Utah, homeowners across the Wasatch Front trust Croft Fireplace. We cover a wide service area from Salt Lake City to Davis County and beyond.

Salt Lake City

Salt Lake City is our primary service area. Based at Brickyard Plaza, we serve homeowners citywide for gas fireplace repair, tune-ups, and inspections.

Bountiful

We serve Bountiful and surrounding communities in northern Salt Lake County. Our technicians can typically schedule visits quickly.

Davis County

Davis County, including Layton, Kaysville, Farmington, and Centerville, falls within our standard service area. An additional service fee applies for calls outside of Davis and Salt Lake counties.

Surrounding Utah Areas

We also serve communities in Summit and Wasatch counties. We offer gas fireplace repair Park City Utah homeowners can schedule year-round, supporting mountain community residents who depend on their fireplaces through the winter.

Our Fireplace Repair Process

Initial Diagnosis

Every visit starts with a conversation about the symptoms, how long the issue has been present, and any recent changes to the unit.

Inspection & Testing

We perform a systematic inspection covering gas pressure, ignition components, safety switches, and the venting path using calibrated tools.

Repair & Replacement of Parts

Once the cause is identified, we explain our findings before starting any work and carry commonly needed parts to handle most repairs on the same visit.

Final Safety Check

Before leaving, we run a full operational test and walk the homeowner through the repair and any maintenance recommendations.

Benefits of Professional Fireplace Repair

Improved Safety

Gas connections are verified leak-free, venting is confirmed clear, and all safety shutoffs are tested to confirm correct function.

Better Heating Efficiency

After a professional gas fireplace repair and service visit, most customers notice a clear improvement in flame quality and heat output.

Extended Fireplace Lifespan

Addressing small issues before they compound is the most effective way to extend the working life of your fireplace.

Cost Savings Over Time

Timely repairs prevent failures that lead to expensive replacements. Catching a worn thermocouple before it causes a gas valve failure can save several hundred dollars.

Fireplace Safety Tips for Homeowners

Signs of Gas Leaks

The most common indicator of a gas leak is a sulfur or rotten egg smell near the fireplace. You may also notice a hissing sound or a pilot that keeps going out without explanation.

Safe Fireplace Usage Practices

Never leave a gas fireplace running unattended, and keep the area in front of the firebox clear of furniture and flammable materials.

Importance of Regular Inspections

A yearly professional inspection catches gradual component wear before it leads to failure or unsafe operation.

Carbon Monoxide Awareness

Install carbon monoxide detectors on every level of your home, test them monthly, replace batteries annually, and leave immediately if an alarm sounds.

Fireplace Brands We Repair

We offer fireplace repair services for a wide array of fireplace brands, including:

Valor | Fireplace X | Lopi | Marquis | Travis Industries | Majestic |  Kingsman | Enviro | Urbana | Grand Canyon | Hargrove | DaVinci | Avalon | All Brands

If you need a fireplace repair in Utah, choose a company you can count on.

Frequently Asked Questions (FAQs)

How often should a gas fireplace be serviced?

Most manufacturers recommend annual service for gas fireplaces, ideally before the heating season begins.

What are common signs that a gas fireplace needs repair?

Common indicators include a pilot light that will not stay lit, an uneven or discolored flame, a gas smell, and the unit not responding to controls.

Can a gas fireplace be repaired, or does it need to be replaced?

In most cases, repair is right, as most problems involve a single component like a thermocouple or gas valve that costs far less than full replacement.

Is it safe to use a gas fireplace with a damaged pilot light?

No. A faulty pilot light prevents the safety system from working correctly, so turn off the unit and schedule a repair before using it again.

What should I do if I smell gas near my fireplace?

Leave the area immediately, avoid all switches, call your gas provider for an emergency shutoff, and then call us for a full inspection.

Do you offer emergency fireplace repair services?

Yes. For urgent situations like gas leaks or a fireplace that will not turn off, contact us and we will get a technician to you as quickly as possible.

How much does gas fireplace repair cost in Utah?

Gas fireplace repair in Utah typically ranges from $100 to $500 depending on the issue and parts required. We provide a clear estimate before any work begins.

If your fireplace is not performing the way it should, the team at Croft Fireplace is ready to help. Visit our showroom, give us a call, or fill out the contact form at croftfireplace.com/contact-us to schedule your service appointment today.

Request Quote


This will close in 0 seconds